Proceedings of the IPENZ annual conference (Proc.IPENZ), February 1997, published in 2 volumes.

• Building envelope correlations for New Zealand office buildings. Bannister, P.: Guan, L. Vol.1#295
• Energy in New Zealand hotels. Isaacs, N.: Crocker, N. Vol.1#311
• Green buildings: some lessons for the commercial sector. Vale, B: Vale, R. Vol.1#305
• Monitoring indoor air quality in Auckland office buildings. Leifer, D. Vol.1#301 Back to subject list

• A chemical reaction engineering approach to modelling drying of particulate or thin layer materials. Chen, X.D.: Xie, G.Z. Vol. 2#35
• A study of bubble size distribution in a foam fractionation column. Wong, C.H.: Hossain, M.M.: Davies, C.E. Vol.2#29
• Analysis of crack nucleation and short crack growth in austenitic stainless alloys using wavelet transforms. Stevens, K.J.: Wells, D.B.: Burnell, J.G. Vol.2#328
• Axial dispersion in a pneumatic conveying line. Tallon, S.: Davies, C.E. Vol.2#50
• Azelaic acid production from oleic acid. Earl, W.B.: Croft, J.M.: Yeates, P.J. Vol.2#1
• Comparison of glycol with silicon oil as a heat transfer medium. Chen, J. Vol.2#78
• Continuous fermentation in periodic modes simulated using the unstructured model. Chen, X.D.: Ruan, L. Vol.2#17
• Discharge of granular materials through adjacent orifices and multi-orifice plates. Davies, C.E.: Fenton, K.: Dorrington, P. Vol.2#62
• Impact spreading of a sand stream on an inclined plate. Davies, C.E.: Fenton, K. Vol.2#56
• Knowledge-based process synthesis. Williamson, C.J. Vol.2#14
• Neural network modelling of a falling film evaporator. Clark, M.: Bakker, H. Vol.2#9
• R410A and R407C as alternatives for refrigerant R22. Chen, J. Vol.2#67
• Some experiences from environmental investigations of gas works sites. Clyde, M.: Proffitt, G. Vol.1#30
• Studies on a rotating tube falling film evaporator. Jebson, R.S.: Chen, H.: Campanella, O. Vol.2#41
• Surface pre-treatment effects on pitting corrosion of stainless steels. Noh, J.S.: Laycock, N.J.: Wells, D.B.: Gao, W. Vol.2#400
• Teaching problem solving skills in engineering design. Allen, R.M.: Gilmour, I.A.: Mackenzie, J.G. Vol.2#4
• The evolution of ammonia from large heaps of urea. Metcalfe, J.: Abrahamson, J. Vol.2#23
• Thermal diffusivity of kiwifruit components (skin, flesh & core) and the making of kiwifruit leather. Chen, X.D.: Pirini, W.A.: McLellan, D.N.: Stevenson, M.J.: Chong, L.V. Vol.2#73
• Use of hi-low kiln strategies to reduce costs of drying timber. Nijdam, J.J.: Keey, R.B. Vol.2#46 Back to subject list

• Seeking analogies between course design and engineering design processes - a case study in food engineering. Cleland, A.C.: Trinh, K.T. Vol.1#15 Back to subject list

• Building envelope correlations for New Zealand office buildings. Bannister, P.: Guan, L. Vol.1#295
• Building envelope correlations for New Zealand office buildings. Bannister, P.: Guan, L. Vol.2#111
• Green buildings: some lessons for the commercial sector. Vale, B: Vale, R. Vol.1#305
• Monitoring indoor air quality in Auckland office buildings. Leifer, D. Vol.1#301
• Occupant controllable loads in commercial buildings. Amor, M.: Bannister, P. Vol.2#100
• Proposed method for measuring the thermal properties of windows in the new BRANZ guarded hotbox. Cox-Smith, I. Vol.2#95
• Saving money by saving energy. Competitive building advantage through energy management. Rogers, P. Vol.2#106
• Single egress and the high rise bulding. Walls, K. Vol.1#153 Back to subject list

• Coastal zone management the Kapiti experience. Lumsden, J.L. Vol.1#123

• Museum of New Zealand: Te Papa Tongarewa - establishment of structural design parameters. Connolly, P.: Kelly, T. Vol.1#73
• The high strain cyclic shear of lead under imposed hydrostatic pressure. Shaw, I.R.: Ferguson, W.G.: Robinson, W.H.: Monti, M.D. Vol.2#291

• An assessment of the sprinkler trade off clauses in the New Zealand Building Code. Barnes, G. Vol.1#183
• An uncertainty analysis of calorimetric techniques. Enright, T.: Fleischmann, C. Vol.1#175
• Analogue addressable fire detection systems. Percy, D.R. Vol.1#150
• Calculating tenability to NZBC requirements. Gillespie, R.P. Vol.1#133
• Design of structures for fire resistance. Thomas, G.C.: Buchanan, A.H.: Fleischmann, C. Vol.1#192
• Development of a risk assessment model for the New Zealand Fire Service. Boyes, J. Vol.1#147
• Domestic fire hazard in New Zealand. Irwin, K. Vol.1#136
• Fire performance of gypsum plasterboard. Buchanan, A.H.: Gerlich, J.T. Vol.1#160
• Fire risk analysis of Scott Base. Cosgrove, B. Vol.1#141
• Fire safety equivalencies. Clements, P.A. Vol.1#198
• Improving the wakening effectiveness of fire alarms in residential areas. Grace, T. Vol.1#129
• Reducing radiation from building fires with fire resistant glazing. Cowles, G. Vol.1#187
• Roxburgh generator water mist fire protection. Caldwell, C.A. Vol.1#200
• Salt water modeling [sic] of fire induced door flows. Clement, J.M. Vol.1#167
• Single egress and the high rise bulding. Walls, K. Vol.1#153
• Uncertainty analysis of zone fire models. Walker, A.M. Vol.1#172 Back to subject list

• Geological impacts on Mangaweka Deviation, State Highway 1 (North Island). Read, S.A.L.: Mildenhall, M.: Roach, P. Vol.1#111 Back to subject list

• Reservoir sedimentation - some aspects of reservoir asset management. Duder, J.N. Vol.1#117

• Design of structures for fire resistance. Thomas, G.C.: Buchanan, A.H.: Fleischmann, C. Vol.1#192
• Large tower structures using air pressure for support. Alexander, K.: Holtslag, T. Vol.2#241
• Museum of New Zealand: Te Papa Tongarewa - establishment of structural design parameters. Connolly, P.: Kelly, T. Vol.1#73
• Seismic retrofitting of Aotea Quay overbridge, Wellington. Gray, A.: White, B. Vol.1#95
• Structural design and behaviour of reinforced concrete columns incorporating high strength materials. Park, R. Vol.1#84
• The real cost of building in steel: using a rational approach for costing structural steelwork. Feeney, M.: Watson, K. Vol.1#99
• Thorndon overbridge seismic retrofit. Powell, A. Vol.1#90 Back to subject list

• Design parameters for an enhanced dehumidifier drying kiln. Carrington, G.: Sun, Z.: Bannister, P. Vol.2#139
• Economic performance of enhanced dehumidifier kiln. Chen, G.: Bannister, P.: Carrington, G.: Sun, Z. Vol.2#144
• Effect of finger length on fingerjoint performance. Walford, B. Vol.1#105
• Use of hi-low kiln strategies to reduce costs of drying timber. Nijdam, J.J.: Keey, R.B. Vol.2#46 Back to subject list

• A new measure of parking activity. Swanson, H.A. Vol.1#217
• A study of contributory factors in road accidents in Jordan. Jdaan, K.S.: El-Shajrawi, W.S Vol.1#268
• An evaluation framework for social severance. Tate, F.: Mara, K. Vol.1#227
• Assessing the road safety effects of land use development proposals. Hughes, T. Vol.1#233
• Evaluation of Loadman, FWD, Benkelman Beam, Nuclear Density Meter and Clegg Hammer for testing unbound granular pavements. Pidwerbesky, B. Vol.1#274
• Guidelines for traffic sign symbols. Swanson, H.A.: Kline, D.W.: Dewar, R.E. Vol.1#239
• Road network planning - towards a comprehensive approach. Gadd, M.L. Vol.1#221
• Road safety performance in New Zealand. Toomath, J.B. Vol.1#261
• Roadside speed surveys design and estimation. Keall, M.D.: Frith, W.J. Vol.1#251
• Roundabout performance and flow variations. Nicholson, A.J.: Chandrakumaran, N.C. Vol.1#245
• The environmental impact of particulate emissions of diesel vehicles and the techniques of particulate measurement. Waring, P.: Gong, R. Vol.1#257
• Traffic-induced vibrations in residences. Pidwerbesky, B.: Chambers, J. Vol.1#284
• Unsealed roads are sustainable. Ferry, A. Vol.1#279
• Unsealed roads: wearing course trials. Hudson, K.C.: Taylor, J.L. Vol.1#289 Back to subject list

• A heat pump for simultaneous refrigeration and water heating. White, S.D.: Cleland, D.J.: Cotter, S.D.: Stephenson, R.A.: Kallu, R.D.S.: Fleming, A.K. Vol.2#117
• Active draft tube control gates for increased generation. Leyland, B.: Jessup, G. Vol.2#215
• Liquid disinfection using high voltage. Johnstone, P.T.: Jaquiery, A.G.: Bodger, P.S. Vol.2#211
• Roxburgh generator water mist fire protection. Caldwell, C.A. Vol.1#200
• Swimming flume for Otago University. Britton, R. Vol.1#212
• The Francou-Rodier classification of maximum floods. Nalder, G. Vol.1#206
• The future of river hazard control. Smart, G.M. Vol.1#209
• The importance of hydrogeology in assessing the environmental effects of the migration of liquid phase hydrocarbons. Broughton, A.: Proffitt, G. Vol.1#34

• A field aligned starting technique for cage induction motors. Boys, J.T.: McDonald, S.P. Vol.2#187
• Corrosion monitoring in high temperature steam using an electrical resistance probe. Lichti, K.A.: Firth, D.M.: Minchington, I.E.: Swann, S.J. Vol.2#394
• FPGAs - a challenge for complex digital systems design. Salcic, Z. Vol.2#193
• Interactive analysis of converter harmonics. Watson, N.R.: Smith, B.C.: Bathurst, G.: Arrillaga, J. Vol.2#199
• Liquid disinfection using high voltage. Johnstone, P.T.: Jaquiery, A.G.: Bodger, P.S. Vol.2#211
• Modelling transformer magnetisation characteristics for harmonic studies. Lisboa, M.L.V.: Arrillaga, J.: Smith, B.C. Vol.2#183
• Pulse charging: re-energising tired cells. Wilkinson, J.J.A.: Covic, G.A. Vol.2#177
• Theoretical base, software realisation and results of investigation of error rate measuring device. Berber, S. Vol.2#205 Back to subject list

• A chemical reaction engineering approach to modelling drying of particulate or thin layer materials. Chen, X.D.: Xie, G.Z. Vol. 2#35
• A heat pump for simultaneous refrigeration and water heating. White, S.D.: Cleland, D.J.: Cotter, S.D.: Stephenson, R.A.: Kallu, R.D.S.: Fleming, A.K. Vol.2#117
• A strategy for implementing demand side management for domestic electricity in New Zealand. Ryan, G.: Fitzgerald, G. Vol.2#83
• Breaking through the pain barrier. Adams, C.: Amor, M.: Bannister, P. Vol.2#149
• Building envelope correlations for New Zealand office buildings. Bannister, P.: Guan, L. Vol.2#111
• Building envelope correlations for New Zealand office buildings. Bannister, P.: Guan, L. Vol.1#295
• Computer building simulation assessment of HVAC system design. Bannister, P.: Guan, L.: Adams, C.: Taylor, S. Vol.2#133
• Design parameters for an enhanced dehumidifier drying kiln. Carrington, G.: Sun, Z.: Bannister, P. Vol.2#139
• Development of a multi disciplinary investigation of energy use in New Zealand households. Stoecklein, A.: Pollard, A.: James, B.: Ryan, G. Vol.2#170
• Economic performance of enhanced dehumidifier kiln. Chen, G.: Bannister, P.: Carrington, G.: Sun, Z. Vol.2#144
• Energy efficiency resource assessment as a tool for quantifying past, present and future energy efficiency uptake rates and potential. Rossouw, R.: Lermit, J.: James, B. Vol.2#164
• Energy in New Zealand hotels. Isaacs, N.: Crocker, N. Vol.2#153
• Energy in New Zealand hotels. Isaacs, N.: Crocker, N. Vol.1#311
• Implementing a practical renewable energy support programme. Weightman, F. Vol.2#158
• Least-cost energy efficient design. Bishop, R.C. Vol.2#129
• Occupant controllable loads in commercial buildings. Amor, M.: Bannister, P. Vol.2#100
• Proposed method for measuring the thermal properties of windows in the new BRANZ guarded hotbox. Cox-Smith, I. Vol.2#95
• Saving money by saving energy. Competitive building advantage through energy management. Rogers, P. Vol.2#106
• Sustainable synergy. Roche, D.: White, G. Vol.1#21
• The energy embodied in building materials - updated NZ coefficients and their significance. Baird, G.: Alcorn, A.: Haslam, P. Vol.2#89
• The problem with payback. Bishop, R.C. Vol.2#123
• Use of hi-low kiln strategies to reduce costs of drying timber. Nijdam, J.J.: Keey, R.B. Vol.2#46 Back to subject list

• Implications of 'sustainability' for New Zealand industry. Buckeridge, J. Vol.1#38
• Knowledge-based process synthesis. Williamson, C.J. Vol.2#14
• Multi-media courseware for professional development. Ilanko, S. Vol.1#12
• Science and technology education - cooperate or die! Geddes, R. Vol.1#1
• Seeking analogies between course design and engineering design processes - a case study in food engineering. Cleland, A.C.: Trinh, K.T. Vol.1#15
• Teaching problem solving skills in engineering design. Allen, R.M.: Gilmour, I.A.: Mackenzie, J.G. Vol.2#4
• The Master of Engineering Management at the University of Canterbury: providing technology managers for the future. Beukman, C.P. Vol.1#7 Back to subject list

• Case study: PWD to private company. Rutledge, J.C. Vol.1#43 Back to subject list

• A new low temperature sialon ceramic. Barris, G.C.: Bowden, M.E.: Sheppard, C. M.: MacKenzie, K. Vol.2#303
• A New Zealand perspective on sol-gel processing of electroceramic thin films. Daglish, M.: Kemmitt, T. Vol.2#313
• Ag current collectors for an extruded tubular SOFC system. Hatchwell, C.E.: Sammes, N.M.: Kendall, K. Vol.2#359
• An advanced ceramic composite prepared from NZ clay. Owers, W.R.: Brown, I.W.M.: Hochgesand, C.B.: Ryan, M.J. Vol.2#419
• Analysis of crack nucleation and short crack growth in austenitic stainless alloys using wavelet transforms. Stevens, K.J.: Wells, D.B.: Burnell, J.G. Vol.2#328
• Analysis of the strength-length relationship of high strength carbon fibre. Pickering, K.L.: Murray, T.L. Vol.2#342
• Application of materials science to drug delivery. Ogle, C.R.: Pickering, K.L.: Rathbone, M.J.: Burggraaf, S.: Bunt, C. Vol.2#377
• Ceramics research at IRL: engineering materials for beyond 2000. Brown, I.W.M. Vol.2#298
• Corrosion monitoring in high temperature steam using an electrical resistance probe. Lichti, K.A.: Firth, D.M.: Minchington, I.E.: Swann, S.J. Vol.2 #394
• Decarburisation behaviour of high silicon spring steels. Mardon, C.: Smaill, J.: Sell, L. Vol.2#269
• Determining structural and conduction requirements for Ni/YSZ cermet solid oxide fuel cell anodes. Brown, M.S.: Sammes, N.M.: Mogensen, M. Vol.2#348
• Developing optical properties in recycle paper. Walmsley, M.R.W.: Chapman, J.B.: Parker, I. Vol.2#386
• Discharge of granular materials through adjacent orifices and multi-orifice plates. Davies, C.E.: Fenton, K.: Dorrington, P. Vol.2#62
• Effect of iron oxide additives on Al2TiO5 formation and properties. Brown, I.W.M.: White, G.V. Vol.2#405
• Effect of the preparation route on the microstructure of (CeO2)0.8(Sm2O3)0.2 solid oxide fuel cell (SOFC) electrolytes. Torrens, R.S.: Sammes, N.M. Vol.2#367
• Effects of yttria on carbothermal reduction and nitridation to form ß, O', and X-phase sialons. Ekström, T.C.: White, G.V.: Brown, I.W.M.: Barris, G.C.: Sheppard, C.M. Vol.2#408
• Fabrication and properties of X-phase sialon produced by a reaction bonding process. Sheppard, C.K.: Barris, G.C.: MacKenzie, K. Vol.2#414
• Heated tool welding of thermoplastic composites. Gehrke, J.W.: Pickering, K.L. Vol.2#371
• Isothermal oxidation of FeAl intermetallics in oxygen and air. Xu, C-H.: Gao, W. Vol.2#423
• Large tower structures using air pressure for support. Alexander, K.: Holtslag, T. Vol.2#241
• Mechanical properties of ceramic discs. Barris, G.C.: Owers, W.R.: Ryan, M.J.: Sheppard, C.M.: White, G.V. Vol.2#411
• Modelling age distribution of waste paper and other recyclable materials. Walmsley, M.R.W.: Muryanto, S. Vol.2#335
• Nuclear magnetic resonance spectroscopy - a versatile new technique for ceramics research. MacKenzie, K.J.D. Vol.2#317
• Oxidation behaviour of 310S stainless steel with surface modification by unbalanced magnetron sputtering. Liu, Z.: Dahm, K.: He, Y.: Gao, W. Vol.2#322
• Phase formation during mechanical alloying. Zhang, D.L. Vol.2#287
• Pyroelectric properties of (Ba,Sr)TiO3 solid solution ceramics. Yoo, J.: Yoon, K.: Gao, W. Vol.2#428
• Sialon refractories - made in New Zealand. White, G.V.: Chen, C.Y.: Barris, G. C.: Cooper, M.T.: Sheppard, C.M.: MacKenzie, K.J.D.: Brown, I.W.M. Vol.2#307
• Structural design and behaviour of reinforced concrete columns incorporating high strength materials. Park, R. Vol.1#84
• Surface pre-treatment effects on pitting corrosion of stainless steels. Noh, J.S.: Laycock, N.J.: Wells, D.B.: Gao, W. Vol.2#400
• The barriers to the commercialisation of fuel cell systems in New Zealand. Sammes, N.M.: Boersma, R.J.: Smith, G.E. Vol.2#381
• The energy embodied in building materials - updated NZ coefficients and their significance. Baird, G.: Alcorn, A.: Haslam, P. Vol.2#89
• The high strain cyclic shear of lead under imposed hydrostatic pressure. Shaw, I.R.: Ferguson, W.G.: Robinson, W.H.: Monti, M.D. Vol.2#291
• The influence of surface nano-crystallisation on the cyclic oxidation of 304 stainless steel. He, Y.: Liu, Z.: Gao, W. Vol.2#433
• The influence of temperature and initial structure on the austenitisation of a high silicon spring steel. Mardon, C.A.: Smaill, J.S. Vol.2#263
• The relationship between fuel cell system efficiency, cost of electricity, and total investment. Boersma, R.J.: Sammes, N.M.: Smith, G. Vol.2#353
• The texturing mechanisms of Bi-Sr-Ca-Cu-O superconductors during thermo-mechanical processes. Li, S.: Gao, W. Vol.2#438
• Thermal stability of S-phase coatings prepared by unbalanced magnetron sputtering deposition. Lu, C-R.: Dahm, K.L.: Gao, W. Vol.2#284
• Unsealed roads: wearing course trials. Hudson, K.C.: Taylor, J.L. Vol.1#289
• Visual modelling of thermal and microstructural evolutions during hot strip rolling processes for C-Mn steels. Liu, Z.: Gao, W.: Wang, G. Vol.2#279 Back to subject list

• Coastal zone management - the Kapiti experience. Lumsden, J.L. Vol.1#123
• Global warming. Fenwick, R.: Silyn-Roberts, H.: Boyle, C. Vol.1#24
• Implications of 'sustainability' for New Zealand industry. Buckeridge, J. Vol.1#38
• Road network planning - towards a comprehensive approach. Gadd, M.L. Vol.1#221
• Some experiences from environmental investigations of gas works sites. Clyde, M.: Proffitt, G. Vol.1#30
• Sustainable synergy. Roche, D.: White, G. Vol.1#21
• The environmental impact of particulate emissions of diesel vehicles and the techniques of particulate measurement. Waring, P.: Gong, R. Vol.1#257
• The importance of hydrogeology in assessing the environmental effects of the migration of liquid phase hydrocarbons. Broughton, A.: Proffitt, G. Vol.1#34
• Unsealed roads are sustainable. Ferry, A. Vol.1#279 Back to subject list

• Public awareness of professional engineers and technologists. Gibson, J.A.: Smith, P.C. Vol.1#79 Back to subject list

• A combustion model of a homogeneous charge hydrogen fuelled rotary engine. Brown, R.: Fang, G.: Green, R.: Sierens, R. Vol.2#226
• A twice full scale Blade - the engineering design of a kinetic sculpture. Gooch, S.D.: Raine, J.K. Vol.2#247
• Active draft tube control gates for increased generation. Leyland, B.: Jessup, G. Vol.2#215
• Alternative fuelling of vehicles; hydrogen-methanol options. Pearce, S.: Green, R. Vol.2#232
• Decarburisation behaviour of high silicon spring steels. Mardon, C.: Smaill, J.: Sell, L. Vol.2#269
• Large tower structures using air pressure for support. Alexander, K.: Holtslag, T. Vol.2#241
• Lateral vibration of non-uniform Euler-Bernoulli cone beams. Naguleswaran, S. Vol.2#253
• Long geothermal steam transmission pipeline. Lee, K.C.: Ziegler, C.A.F.: Reidy, D.: Morris, C.J. Vol.2#258
• Mechanical properties of ceramic discs. Barris, G.C.: Owers, W.R.: Ryan, M.J.: Sheppard, C.M.: White, G.V. Vol.2#411
• Phase formation during mechanical alloying. Zhang, D.L. Vol.2#287
• Rehabilitation of a low level dam outlet gate at Whakamaru power station. Tritt, S. Vol.2#221
• The `eye' inside. Brady, P.M. Vol.2#238
• The frequencies of a uniform beam with one end on resilient support and with a tip body at the other end. Naguleswaran, S. Vol.2#272
• The influence of temperature and initial structure on the austenitisation of a high silicon spring steel. Mardon, C.A.: Smaill, J.S. Vol.2#263
• The texturing mechanisms of Bi-Sr-Ca-Cu-O superconductors during thermo-mechanical processes. Li, S.: Gao, W. Vol.2#438 Back to subject list

• Case study: PWD to private company. Rutledge, J.C. Vol.1#43

• The `eye' inside. Brady, P.M. Vol.2#238 Back to subject list

• Theoretical base, software realisation and results of investigation of error rate measuring device. Berber, S. Vol.2#205

• An assessment of the sprinkler trade off clauses in the New Zealand Building Code. Barnes, G. Vol.1#183
• Building controls in New Zealand and the professional engineer. Hunt, J.H. Vol.1#67
• Single egress and the high rise bulding. Walls, K. Vol.1#153

• Overview of the personal communication network (PCN). Khan, J.Y. Vol.1#317