Author index

IPENZ Annual Conference Proceedings 1997

Author index

Note: entries do not appear under Q amd U

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A

Adams, C.: Amor, M.: Bannister, P. Breaking through the pain barrier. Proc.IPENZ. 2 Page 149
Abrahamson, J. see Metcalfe, J.
Adams, C. see Bannister, P.
Alcorn, A. see Baird, G.
Alexander, K.: Holtslag, T. Large tower structures using air pressure for support. Proc.IPENZ. 2 Page 241
Allen, R.M.: Gilmour, I.A.: Mackenzie, J.G. Teaching problem solving skills in engineering design. Proc.IPENZ. 2 Page 4
Amor, M. see Adams, C.
Amor, M.: Bannister, P. Occupant controllable loads in commercial buildings. Proc.IPENZ. 2 Page 100
Arrillaga, J. see Lisboa, M.L.V.
Arrillaga, J. see Watson, N.R.

Back to the alphabet

B

Baird, G.: Alcorn, A.: Haslam, P. The energy embodied in building materials - updated NZ coefficients and their significance. Proc.IPENZ. 2 Page 89
Bakker, H. see Clark, M.
Bannister, P. see Adams, C.
Bannister, P. see Amor, M.
Bannister, P. see Carrington, G.
Bannister, P. see Chen, G.
Bannister, P.: Guan, L. Building envelope correlations for New Zealand office buildings. Proc.IPENZ. 1 Page 295
Bannister, P.: Guan, L. Building envelope correlations for New Zealand office buildings. Proc.IPENZ. 2 Page 111
Bannister, P.: Guan, L.: Adams, C.: Taylor, S. Computer building simulation assessment of HVAC system design. Proc.IPENZ. 2 Page 133
Barnes, G. An assessment of the sprinkler trade off clauses in the New Zealand Building Code. Proc.IPENZ. 1 Page 183
Barris, G.C. see Ekström, T.C.
Barris, G.C. see Sheppard, C.M.
Barris, G.C. see White, G.V.
Barris, G.C.: Bowden, M.E.: Sheppard, C.M.: MacKenzie, K. A new low temperature sialon ceramic. Proc.IPENZ. 2 Page 303
Barris, G.C.: Owers, W.R.: Ryan, M.J.: Sheppard, C.M.: White, G.V. Mechanical properties of ceramic discs. Proc.IPENZ. 2 Page 411
Bathurst, G.: see Watson, N.R.
Berber, S. Theoretical base, software realisation and results of investigation of error rate measuring device. Proc.IPENZ. 2 Page 205
Beukman, C.P. The Master of Engineering Management at the University of Canterbury: providing technology managers for the future. Proc.IPENZ. 1 Page 7
Bishop, R.C. Least-cost energy efficient design. Proc.IPENZ. 2 Page 129
Bishop, R.C. The problem with payback. Proc.IPENZ. 2 Page 123
Bodger, P.S. see Johnstone, P.T.
Boersma, R.J. see Sammes, N.M.
Boersma, R.J.: Sammes, N.M.: Smith, G. The relationship between fuel cell system efficiency, cost of electricity, and total investment. Proc.IPENZ. 2 Page 353
Bowden, M.E. see Barris, G.C.
Boyes, J. Development of a risk assessment model for the New Zealand Fire Service. Proc.IPENZ. 1 Page 147
Boyle, C. see Fenwick, R.
Boys, J.T.: McDonald, S.P. A field aligned starting technique for cage induction motors. Proc.IPENZ. 2 Page 187
Brady, P.M. The 'eye' inside. Proc.IPENZ. 2 Page 238
Britton, R. Swimming flume for Otago University. Proc.IPENZ. 1 Page 212
Broughton, A.: Proffitt, G. The importance of hydrogeology in assessing the environmental effects of the migration of liquid phase hydrocarbons. Proc.IPENZ. 1 Page 34
Brown, I.M. see Eckstr”m, T.C.
Brown, I.W.M. Ceramics research at IRL: engineering materials for beyond 2000. Proc.IPENZ. 2 Page 298
Brown, I.W.M. see Owers, W.R.
Brown, I.W.M. see White, G.V.
Brown, I.W.M.: White, G.V. Effect of iron oxide additives on Al2TiO5 formation and properties. Proc.IPENZ. 2 Page 405
Brown, M.S.: Sammes, N.M.: Mogensen, M. Determining structural and conduction requirements for Ni/YSZ cermet solid oxide fuel cell anodes. Proc.IPENZ. 2 Page 348
Brown, R.: Fang, G.: Green, R.: Sierens, R. A combustion model of a homogeneous charge hydrogen fuelled rotary engine. Proc.IPENZ. 2 Page 226
Buchanan, A.H. see Thomas, G.C.
Buchanan, A.H.: Gerlich, J.T. Fire performance of gypsum plasterboard. Proc.IPENZ. 1 Page 160
Buckeridge, J. Implications of 'sustainability' for New Zealand industry. Proc.IPENZ. 1 Page 38
Bunt, C. see Ogle, C.R.
Burggraaf, S. see Ogle, C.R.
Burnell, J.G. see Stevens, K.J.

Back to the alphabet

C

Caldwell, C.A. Roxburgh generator water mist fire protection. Proc.IPENZ. 1 Page 200
Campanella, O. see Jebson, R.S.
Carrington, G. see Chen, G.
Carrington, G.: Sun, Z.: Bannister, P. Design parameters for an enhanced dehumidifier drying kiln. Proc.IPENZ. 2 Page 139
Chambers, J. see Pidwerbesky, B.
Chandrakumaran, N.C. see Nicholson, A.J.
Chapman, J.B. see Walmsley, M.R.W.
Chen, C.Y. see White, G.V.
Chen, G.: Bannister, P.: Carrington, G.: Sun, Z. Economic performance of enhanced dehumidifier kiln. Proc.IPENZ. 2 Page 144
Chen, H. see Jebson, R.S.
Chen, J. Comparison of glycol with silicon oil as a heat transfer medium. Proc.IPENZ. 2 Page 78
Chen, J. R410A and R407C as alternatives for refrigerant R22. Proc.IPENZ. 2 Page 67
Chen, X.D.: Pirini, W.A.: McLellan, D.N.: Stevenson, M.J.: Chong, L.V. Thermal diffusivity of kiwifruit components (skin, flesh & core) and the making of kiwifruit leather. Proc.IPENZ. 2 Page 73
Chen, X.D.: Ruan, L. Continuous fermentation in periodic modes simulated using the unstructured model. Proc.IPENZ. 2 Page 17
Chen, X.D.: Xie, G.Z. A chemical reaction engineering approach to modelling drying of particulate or thin layer materials. Proc.IPENZ. 2 Page 35
Chong, L.V. see Chen, X.D.
Clark, M.: Bakker, H. Neural network modelling of a falling film evaporator. Proc.IPENZ. 2 Page 9
Cleland, A.C.: Trinh, K.T. Seeking analogies between course design and engineering design processes - a case study in food engineering. Proc.IPENZ. 1 Page 15
Cleland, D.J. see White, S.D.
Clement, J.M. Salt water modeling [sic] of fire induced door flows. Proc.IPENZ. 1 Page 167
Clements, P.A. Fire safety equivalencies. Proc.IPENZ. 1 Page 198
Clyde, M.: Proffitt, G. Some experiences from environmental investigations of gas works sites. Proc.IPENZ. 1 Page 30
Connolly, P.: Kelly, T. Museum of New Zealand: Te Papa Tongarewa - establishment of structural design parameters. Proc.IPENZ. 1 Page 73
Cooper, M.T. see White, G.V.
Cosgrove, B. Fire risk analysis of Scott Base. Proc.IPENZ. 1 Page 141
Cotter, S.D. see White, S.D.
Covic, G.A. see Wilkinson, J.J.A.
Cowles, G. Reducing radiation from building fires with fire resistant glazing. Proc.IPENZ. 1 Page 187
Cox-Smith, I. Proposed method for measuring the thermal properties of windows in the new BRANZ guarded hotbox. Proc.IPENZ. 2 Page 95
Crocker, N. see Isaacs, N.
Crocker, N. see Isaacs, N.
Croft, J.M. see Earl, W.B.

Back to the alphabet

D

Daglish, M.: Kemmitt, T. A New Zealand perspective on sol-gel processing of electroceramic thin films. Proc.IPENZ. 2 Page 313
Dahm, K. see Liu, Z.
Dahm, K.L. see Lu, C-R.
Davies, C.E. see Tallon, S.
Davies, C.E. see Wong, C.H.
Davies, C.E.: Fenton, K. Impact spreading of a sand stream on an inclined plate. Proc.IPENZ. 2 Page 56
Davies, C.E.: Fenton, K.: Dorrington, P. Discharge of granular materials through adjacent orifices and multi-orifice plates. Proc.IPENZ. 2 Page 62
Dewar, R.E. see Swanson, H.A.
Dorrington, P. see Davies, C.E.
Duder, J.N. Reservoir sedimentation - some aspects of reservoir asset management. Proc.IPENZ. 1 Page 117

Back to the alphabet

E

Earl, W.B.: Croft, J.M.: Yeates, P.J. Azelaic acid production from oleic acid. Proc.IPENZ. 2 Page 1
Ekström, T.C.: White, G.V.: Brown, I.W.M.: Barris, G.C.: Sheppard, C.M. Effects of yttria on carbothermal reduction and nitridation to form ß, O', and X-phase sialons. Proc.IPENZ. 2 Page 408
El-Shajrawi, W.S. Proc.IPENZ. 1 Page
Enright, T.: Fleischmann, C. An uncertainty analysis of calorimetric techniques. Proc.IPENZ. 1 Page 175

Back to the alphabet

F

Fang, G. see Brown, R.
Feeney, M.: Watson, K. The real cost of building in steel: using a rational approach for costing structural steelwork. Proc.IPENZ. 1 Page 99
Fenton, K. see Davies, C.E.
Fenwick, R.: Silyn-Roberts, H.: Boyle, C. Global warming. Proc.IPENZ. 1 Page 24
Ferguson, W.G. see Shaw, I.R.
Ferry, A. Unsealed roads are sustainable. Proc.IPENZ. 1 Page 279
Firth, D.M. see Lichti, K.A.
Fitzgerald, G. see Ryan, G.
Fleischmann, C. see Enright, T.
Fleischmann, C. see Thomas, G.C.
Fleming, A.K. see White, S.D.
Frith, W.J. see Keall, M.D.

Back to the alphabet

G

Gadd, M.L. Road network planning - towards a comprehensive approach. Proc.IPENZ. 1 Page 221
Gao, W. see He, Y.
Gao, W. see Li, S.
Gao, W. see Liu, Z.
Gao, W. see Liu, Z.
Gao, W. see Lu, C-R.
Gao, W. see Noh, J.S.
Gao, W. see Xu, C-H.
Gao, W. see Yoo, J.
Geddes, R. Science and technology education - cooperate or die! Proc.IPENZ. 1 Page 1
Gehrke, J.W.: Pickering, K.L. Heated tool welding of thermoplastic composites. Proc.IPENZ. 2 Page 371
Gerlich, J.T. see Buchanan, A.H.
Gibson, J.A.: Smith, P.C. Public awareness of professional engineers and technologists. Proc.IPENZ. 1 Page 79
Gillespie, R.P. Calculating tenability to NZBC requirements. Proc.IPENZ. 1 Page 133
Gilmour, I.A. see Allen, R.M.
Gong, R. see Waring, P.
Gooch, S.D.: Raine, J.K. A twice full scale Blade - the engineering design of a kinetic sculpture. Proc.IPENZ. 2 Page 247
Grace, T. Improving the wakening effectiveness of fire alarms in residential areas. Proc.IPENZ. 1 Page 129
Gray, A.: White, B. Seismic retrofitting of Aotea Quay overbridge, Wellington. Proc.IPENZ. 1 Page 95
Green, R. see Brown, R.
Green, R. see Pearce, S.
Guan, L. see Bannister, P.
Guan, L. see Bannister, P.
Guan, L. see Bannister, P.

Back to the alphabet

H

Haslam, P. see Baird, G.
Hatchwell, C.E.: Sammes, N.M.: Kendall, K. Ag current collectors for an extruded tubular SOFC system. Proc.IPENZ. 2 Page 359
He, Y. see Liu, Z.
He, Y.: Liu, Z.: Gao, W. The influence of surface nano-crystallisation on the cyclic oxidation of 304 stainless steel. Proc.IPENZ. 2 Page 433
Hochgesand, C.B. see Owers, W.R.
Holtslag, T. see Alexander, K.
Hossain, M.M. see Wong, C.H.
Hudson, K.C.: Taylor, J.L. Unsealed roads: wearing course trials. Proc.IPENZ. 1 Page 289
Hughes, T. Assessing the road safety effects of land use development proposals. Proc.IPENZ. 1 Page 233
Hunt, J.H. Building controls in New Zealand and the professional engineer. Proc.IPENZ. 1 Page 67

Back to the alphabet

I

Ilanko, S. Multi-media courseware for professional development. Proc.IPENZ. 1 Page 12
Irwin, K. Domestic fire hazard in New Zealand. Proc.IPENZ. 1 Page 136
Isaacs, N.: Crocker, N. Energy in New Zealand hotels. Proc.IPENZ. 2 Page 153
Isaacs, N.: Crocker, N. Energy in New Zealand hotels. Proc.IPENZ. 1 Page 311

Back to the alphabet

J

James, B. see Rossouw, P.
James, B. see Stoecklein, A.
Jaquiery, A.G. see Johnstone, P.T.
Jdaan, K.S.: El-Shajrawi, W.S A study of contributory factors in road accidents in Jordan. Proc.IPENZ. 1 Page 268
Jebson, R.S.: Chen, H.: Campanella, O. Studies on a rotating tube falling film evaporator. Proc.IPENZ. 2 Page 41
Jessup, G. see Leyland, B.
Johnstone, P.T.: Jaquiery, A.G.: Bodger, P.S. Liquid disinfection using high voltage. Proc.IPENZ. 2 Page 211

Back to the alphabet

K

Kallu, R.D.S. see White, S.D.
Keall, M.D.: Frith, W.J. Roadside speed surveys design and estimation. Proc.IPENZ. 1 Page 251
Keey, R.B. see Nijdam, J.J.
Kelly, T. see Connolly, P.
Kemmit, T. see Daglish, M.
Kendall, K. see Hatchwell, C.E.
Khan, J.Y. Overview of the personal communication network (PCN). Proc.IPENZ. 1 Page 317
Kline, D.W. see Swanson, H.A.

Back to the alphabet

L

Laycock, N.J. see Noh, J.S.
Lee, K.C.: Ziegler, C.A.F.: Reidy, D.: Morris, C.J. Long geothermal steam transmission pipeline. Proc.IPENZ. 2 Page 258
Leifer, D. Monitoring indoor air quality in Auckland office buildings. Proc.IPENZ. 1 Page 301
Lermit, J. see Rossouw, P.
Leyland, B.: Jessup, G. Active draft tube control gates for increased generation. Proc.IPENZ. 2 Page 215
Li, S.: Gao, W. The texturing mechanisms of Bi-Sr-Ca-Cu-O superconductors during thermo-mechanical processes. Proc.IPENZ. 2 Page 438
Lichti, K.A.: Firth, D.M.: Minchington, I.E.: Swann, S.J. Corrosion monitoring in high temperature steam using an electrical resistance probe. Proc.IPENZ. 2 Page 394
Lisboa, M.L.V.: Arrillaga, J.: Smith, B.C. Modelling transformer magnetisation characteristics for harmonic studies. Proc.IPENZ. 2 Page 183
Liu, Z. see He, Y.
Liu, Z.: Dahm, K.: He, Y.: Gao, W. Oxidation behaviour of 310S stainless steel with surface modification by unbalanced magnetron sputtering. Proc.IPENZ. 2 Page 322
Liu, Z.: Gao, W.: Wang, G. Visual modelling of thermal and microstructural evolutions during hot strip rolling processes for C-Mn steels. Proc.IPENZ. 2 Page 279
Lu, C-R.: Dahm, K.L.: Gao, W. Thermal stability of S-phase coatings prepared by unbalanced magnetron sputtering deposition. Proc.IPENZ. 2 Page 284
Lumsden, J.L. Coastal zone management the Kapiti experience. Proc.IPENZ. 1 Page 123

Back to the alphabet

M

Mackenzie, J.G. see Allen, R.M.
MacKenzie, K. see Barris, G.C.
MacKenzie, K. see Sheppard, C.M.
MacKenzie, K.J.D. Nuclear magnetic resonance spectroscopy - a versatile new technique for ceramics research. Proc.IPENZ. 2 Page 317
MacKenzie, K.J.D. see White, G.V.
Mara, K. see Tate, F.
Mardon, C.: Smaill, J.: Sell, L. Decarburisation behaviour of high silicon spring steels. Proc.IPENZ. 2 Page 269
Mardon, C.A.: Smaill, J.S. The influence of temperature and initial structure on the austenitisation of a high silicon spring steel. Proc.IPENZ. 2 Page 263
McDonald, S.P. see Boys, J.T.
McLellan, D.N. see Chen, X.D.
Metcalfe, J.: Abrahamson, J. The evolution of ammonia from large heaps of urea. Proc.IPENZ. 2 Page 23
Mildenhall, M. see Read, S.A.L.
Minchington, I.E. see Lichti, K.A.
Mogensen, M. see Brown, M.S.
Monti, M.D. see Shaw, I.R.
Morris, C.J. see Lee, K.C.
Murray, T.L. see Pickering, K.L.
Muryanto, S. see Walmsley, M.R.W.

Back to the alphabet

N

Naguleswaran, S. Lateral vibration of non-uniform Euler-Bernoulli cone beams. Proc.IPENZ. 2 Page 253
Naguleswaran, S. The frequencies of a uniform beam with one end on resilient support and with a tip body at the other end. Proc.IPENZ. 2 Page 272
Nalder, G. The Francou-Rodier classification of maximum floods. Proc.IPENZ. 1 Page 206
Nicholson, A.J.: Chandrakumaran, N.C. Roundabout performance and flow variations. Proc.IPENZ. 1 Page 245
Nijdam, J.J.: Keey, R.B. Use of hi-low kiln strategies to reduce costs of drying timber. Proc.IPENZ. 2 Page 46
Noh, J.S.: Laycock, N.J.: Wells, D.B.: Gao, W. Surface pre-treatment effects on pitting corrosion of stainless steels. Proc.IPENZ. 2 Page 400

Back to the alphabet

O

Ogle, C.R.: Pickering, K.L.: Rathbone, M.J.: Burggraaf, S.: Bunt, C. Application of materials science to drug delivery. Proc.IPENZ. 2 Page 377
Owers, W.R. see Barris, G.C.
Owers, W.R.: Brown, I.W.M.: Hochgesand, C.B.: Ryan, M.J. An advanced ceramic composite prepared from NZ clay. Proc.IPENZ. 2 Page 419

Back to the alphabet

P

Park, R. Structural design and behaviour of reinforced concrete columns incorporating high strength materials. Proc.IPENZ. 1 Page 84
Parker, I. see Walmsley, M.R.W.
Pearce, S.: Green, R. Alternative fuelling of vehicles; hydrogen-methanol options. Proc.IPENZ. 2 Page 232
Percy, D.R. Analogue addressable fire detection systems. Proc.IPENZ. 1 Page 150
Pickering, K.L. see Gehrke, J.W.
Pickering, K.L. see Ogle, C.R.
Pickering, K.L.: Murray, T.L. Analysis of the strength-length relationship of high strength carbon fibre. Proc.IPENZ. 2 Page 342
Pidwerbesky, B. Evaluation of Loadman, FWD, Benkelman Beam, Nuclear Density Meter and Clegg Hammer for testing unbound granular pavements. Proc.IPENZ. 1 Page 274
Pidwerbesky, B.: Chambers, J. Traffic-induced vibrations in residences. Proc.IPENZ. 1 Page 284
Pirini, W.A. see Chen, X.D.
Pollard, A. see Stoecklein, A.
Powell, A. Thorndon overbridge seismic retrofit. Proc.IPENZ. 1 Page 90
Proffitt, G. see Broughton, A.
Proffitt, G. see Clyde, M.

Back to the alphabet

R

Raine, J.K. see Gooch, S.D.
Rathbone, M.J. see Ogle, C.R.
Read, S.A.L.: Mildenhall, M.: Roach, P. Geological impacts on Mangaweka Deviation, State Highway 1 (North Island). Proc.IPENZ. 1 Page 111
Reidy, D. see Lee, K.C.
Roach, P. see Read, S.A.L.
Robinson, W.H. see Shaw, I.R.
Roche, D.: White, G. Sustainable synergy. Proc.IPENZ. 1 Page 21
Rogers, P. Saving money by saving energy. Competitive building advantage through energy management. Proc.IPENZ. 2 Page 106
Rossouw, R.: Lermit, J.: James, B. Energy efficiency resource assessment as a tool for quantifying past, present and future energy efficiency uptake rates and potential. Proc.IPENZ. 2 Page 164
Ruan, L. see Chen, X.D.
Rutledge, J.C. Case study: PWD to private company. Proc.IPENZ. 1 Page 43
Ryan, G. see Stoecklein, A.
Ryan, G.: Fitzgerald, G. A strategy for implementing demand side management for domestic electricity in New Zealand. Proc.IPENZ. 2 Page 83
Ryan, M.J. see Barris, G.C.
Ryan, M.J. see Owers, W.R.

Back to the alphabet

S

Salcic, Z. FPGAs - a challenge for complex digital systems design. Proc.IPENZ. 2 Page 193
Sammes, N.M. see Boersma, R.J.
Sammes, N.M. see Brown, M.S.
Sammes, N.M. see Hatchwell, C.E.
Sammes, N.M. see Torrens, R.S.
Sammes, N.M.: Boersma, R.J.: Smith, G.E. The barriers to the commercialisation of fuel cell systems in New Zealand. Proc.IPENZ. 2 Page 381
Sell, L. see Mardon, C.
Shaw, I.R.: Ferguson, W.G.: Robinson, W.H.: Monti, M.D. The high strain cyclic shear of lead under imposed hydrostatic pressure. Proc.IPENZ. 2 Page 291
Sheppard, C.K.: Barris, G.C.: MacKenzie, K. Fabrication and properties of X-phase sialon produced by a reaction bonding process. Proc.IPENZ. 2 Page 414
Sheppard, C.M. see Barris, G.C.
Sheppard, C.M. see Barris, G.C.
Sheppard, C.M. see Eckström, T.C.
Sheppard, C.M. see White, G.V.
Sierens, R. see Brown, R.
Silyn-Roberts, H. see Fenwick, R.
Smaill, J. see Mardon, C.
Smaill, J.S. see Mardon, C.A.
Smart, G.M. The future of river hazard control. Proc.IPENZ. 1 Page 209
Smith, B.C. see Lisboa, M.L.V.
Smith, B.C. see Watson, N.R.
Smith, G. see Boersma, R.J.
Smith, G.E. see Sammes, N.M.
Smith, P.C. see Gibson, J.A.
Stephenson, R.A. see White, S.D.
Stevens, K.J.: Wells, D.B.: Burnell, J.G. Analysis of crack nucleation and short crack growth in austenitic stainless alloys using wavelet transforms. Proc.IPENZ. 2 Page 328
Stevenson, M.J. see Chen, X.D.
Stoecklein, A.: Pollard, A.: James, B.: Ryan, G. Development of a multi disciplinary investigation of energy use in New Zealand households. Proc.IPENZ. 2 Page 170
Sun, Z. see Carrington, G.
Sun, Z. see Chen, G.
Swann, S.J. see Lichti, K.A.
Swanson, H.A. A new measure of parking activity. Proc.IPENZ. 1 Page 217
Swanson, H.A.: Kline, D.W.: Dewar, R.E. Guidelines for traffic sign symbols. Proc.IPENZ. 1 Page 239

Back to the alphabet

T

Tallon, S.: Davies, C.E. Axial dispersion in a pneumatic conveying line. Proc.IPENZ. 2 Page 50
Tate, F.: Mara, K. An evaluation framework for social severance. Proc.IPENZ. 1 Page 227
Taylor, J.L. see Hudson, K.C.
Taylor, S. see Bannister, P.
Thomas, G.C.: Buchanan, A.H.: Fleischmann, C. Design of structures for fire resistance. Proc.IPENZ. 1 Page 192
Toomath, J.B. Road safety performance in New Zealand. Proc.IPENZ. 1 Page 261
Torrens, R.S.: Sammes, N.M. Effect of the preparation route on the microstructure of (CeO2)0.8(Sm2O3)0.2 solid oxide fuel cell (SOFC) electrolytes. Proc.IPENZ. 2 Page 367
Trinh, K.T. see Cleland, A.C.
Tritt, S. Rehabilitation of a low level dam outlet gate at Whakamaru power station. Proc.IPENZ. 2 Page 221

Back to the alphabet

V

Vale, B: Vale, R. Green buildings: some lessons for the commercial sector. Proc.IPENZ. 1 Page 305
Vale, R. see Vale, B.

Back to the alphabet

W

Walford, B. Effect of finger length on fingerjoint performance. Proc.IPENZ. 1 Page 105
Walker, A.M. Uncertainty analysis of zone fire models. Proc.IPENZ. 1 Page 172
Walls, K. Single egress and the high rise bulding. Proc.IPENZ. 1 Page 153
Walmsley, M.R.W.: Chapman, J.B.: Parker, I. Developing optical properties in recycle paper. Proc.IPENZ. 2 Page 386
Walmsley, M.R.W.: Muryanto, S. Modelling age distribution of waste paper and other recyclable materials. Proc.IPENZ. 2 Page 335
Wang, G. see Liu, Z.
Waring, P.: Gong, R. The environmental impact of particulate emissions of diesel vehicles and the techniques of particulate measurement. Proc.IPENZ. 1 Page 257
Watson, K. see Feeney, M.
Watson, N.R.: Smith, B.C.: Bathurst, G.: Arrillaga, J. Interactive analysis of converter harmonics. Proc.IPENZ. 2 Page 199
Weightman, F. Implementing a practical renewable energy support programme. Proc.IPENZ. 2 Page 158
Wells, D.B. see Noh, J.S.
Wells, D.B. see Stevens, K.J.
White, B. see Gray, A.
White, G. see Roche, D.
White, G.V. see Barris, G.C.
White, G.V. see Brown, I.W.M.
White, G.V. see Ekström, T.C.
White, G.V.: Chen, C.Y.: Barris, G.C.: Cooper, M.T.: Sheppard, C.M.: MacKenzie, K.J.D.: Brown, I.W.M. Sialon refractories - made in New Zealand. Proc.IPENZ. 2 Page 307
White, S.D.: Cleland, D.J.: Cotter, S.D.: Stephenson, R.A.: Kallu, R.D.S.: Fleming, A.K. A heat pump for simultaneous refrigeration and water heating. Proc.IPENZ. 2 Page 117
Wilkinson, J.J.A.: Covic, G.A. Pulse charging: re-energising tired cells. Proc.IPENZ. 2 Page 177
Williamson, C.J. Knowledge-based process synthesis. Proc.IPENZ. 2 Page 14
Wong, C.H.: Hossain, M.M.: Davies, C.E. A study of bubble size distribution in a foam fractionation column. Proc.IPENZ. 2 Page 29

Back to the alphabet

X

Xie, G.Z. see Chen, X.D.
Xu, C-H.: Gao, W. Isothermal oxidation of FeAl intermetallics in oxygen and air. Proc.IPENZ. 2 Page 423

Back to the alphabet

Y

Yeates, P.J. see Earl, W.B.
Yoo, J.: Yoon, K.: Gao, W. Pyroelectric properties of (Ba,Sr)TiO3 solid solution ceramics. Proc.IPENZ. 2 Page 428
Yoon, K. see Yoo, J.

Back to the alphabet

Z

Zhang, D.L. Phase formation during mechanical alloying. Proc.IPENZ. 2 Page 287
Ziegler, C.A.F. see Lee, K.C.

Back to the alphabet